 |
 |
|
|
| |
 |
|
|
|
| |
|
|
 |
Access Roll-up |
| |
|
| |
Snow Sport |
| |
|
| |
Bed Rug |
| |
|
| |
Superchips |
| |
|
| |
Access Rollup |
| |
How
does the Access Roll-up Cover or LiteRider work?
Simply release the auto-latch and roll the cover to
the front of your pickup. The bars and bows are attached
to the cover and roll up with it. Once the cover is
rolled up to the back of the cab, secure it with the
quick release straps. To close the cover, simply roll
it back to the tailgate, over-center the roll-up/tensioning
bar into the strikes and the auto-latch holds it securely
in place. For additional security, push the slide-locks
into place. Then, seal the sides with your hand.
What
is the difference between the Access Roll-up Cover and
the LiteRider?
Both covers offer the same great rollup style design.
The LiteRider is our standard model and theAccess Roll-up
Cover is our premium model. The Access Roll-up Cover
comes with a thumb dial direct tension adjustment, super
heavy duty cover, and 1 1/2" side sealing system.
It is our best seller. The LiteRider has thumb dial
tension adjusters, a Heavy-Duty cover and a 1"
side sealing system. The material is tougher and stronger
than any other cover made. However the Access Cover
is even stronger. The Access Roll-up Cover has been
manufactured since 1988 and is "the proven truck
cover that keeps working for you (tm).
Why
are the ACCESS & LiteRider Roll-up Tonneau Covers
the tightest made?
For a few reasons: 1. Angled Roll-up Bar: The unique
roll-up bar over-centers into the strikes, pulling the
cover tight from front to rear. Giving you the tightest
soft cover made. Plus the cover is wrapped around the
anodized aluminum roll-up bar for better styling and
a tight seal over the tailgate. 2. Adjustable Tension:
The tension adjusters allow you to fine tune the cover
tension with the turn of a dial. Giving you control
over your cover tension, not the weather. No tools are
needed. Just turn the dial to tighten your cover and
feel good knowing you have the tightest cover made.
Will the Access Roll-up
Cover or LiteRider keep my pickup bed dry?
Our covers are waterproof and our rails come with a
closed cell gasket attached to the sides. However, your
tailgate is not sealed like your doors. We suggest that
you purchase the optionalTrailSeal Tailgate Gasket for
that. On some pickup models the stake pockets may need
to be covered.
Does
the Access or LiteRider Roll-up Cover increase my gas
mileage?
With the Access or LiteRider in the closed position,
your pickup's aerodynamics are improved, which results
in increased mileage and handling.
Are
the Access Roll-up Cover & LiteRider Lockable?
The Access and LiteRider Roll-up Covers come with slide-locks.
The optional tailgate lock is needed to lock the tailgate.
Will
the Access Cover or LiteRider shrink in the cold or
stretch in the heat?
Our material is Flexible at 40 below & is stretch
and shrink resistant. It is tested and proven in all
four seasons.
Will
the Access Cover or LiteRider work with other accessories
such as bed liners, bed caps, bed rails, toolboxes,
and cab spoilers?
Special toolbox Access Cover models are available for
late model full size pickups. The Access coveror LiteRider
have a Specially Engineered Slanted (angled) Rail Design
delivering more function and style. It is Accessory
Friendly- allowing plenty of room for bed rails, while
still allowing you room to seal the cover. Easier Operation-The
slanted design makes opening and closing the cover easier
and longer lasting. The heavy-duty rails are durable
and the Sleek Appearance contours to the design of the
truck bed. Plus if you likne accessoris check out the
all new CargoBox. It is designed specifically for pickup
trucks with Access or LiteRider Covers.
What
size toolbox will the Access Toolbox Edition work with?
This cover will fit most 20"-21" over-the-rail
style toolboxes and comes with all the features of the
Access Roll-up Cover. Each kit includes a sealing header
bar adaptable for most 20"-21" over-the-rail
toolboxes.
How
does the Access Cover or LiteRider install?
They install with clamps. A professional installer can
install our covers in about 10 minutes. However, plan
about 10-45 minutes at home depending on your experience
and model. The units are package for a fast easy at
home installation with clamps specifically designed
for the covers and your pickup.
Can
I install my Access Cover or LiteRider?
Yes, the instructions are clear-cut. If you do need
assistance, call 1-800-233-4655 between 9-5pm CST. Our
customers overwhelmingly say "it was simple and
easy to install".
Can
I adjust the tension of the Access Cover or LiteRider?
YES, The direct dial tension adjusters allow you to
fine tune the cover tension with the turn of a dial.
Giving you control over your cover tension, not the
weather. No tools are needed. Plus there are no moving
parts to fail or springs to corrode.
How
long will the cover material last?
The life expectancy is determined by how well you take
care of it. The Access Cover material heavy-duty and
double coated. It is the most expensive. It is tougher,
more durable and proven than any other cover. The LiteRider
Cover material is tough as well. The LiteRider material
is still tough. Just note as tought as the Access material.
However, how you care for the cover, will determine
just how long it will last. We suggest that you use
PPC Formula 2 Cleaner/Protectant to increase the longevity
of your cover.
How
long will the side hook & loop sealing system last?
It has been tested and proven to provide years of service
in all four seasons. It is tested - proven - and guaranteed.
Will
the Access Cover or LiteRider work with 5th Wheels?
YES. Simply roll up the cover to the front of your truck
and secure it with the quick release straps. |
| |
Snow Sport |
| |
How
does the SnowSport™ Install to my vehicle?
The SnowSport™ personal utility plow hooks up the
the front receiver (2" square tube) hitch just like
hooking up a receiver on a hitch used at the rear of a
vehicle for towing trailers. Is
a front receiver hitch needed?
Yes, and it comes with the plow package along with instructions
to install it.
How
difficult is it to install the hitch and plow?
The front end hitches are designed to bolt in place
on most models - occasionally, certain models my require
drilling. The instructions are clear cut. The front
receiver hitch is mounted to the vehicle and the push
frame is plugged into the front recevier hitch. The
plow simply hangs on the push frame.
Can
I install the SnowSport™ Plow myself?
YES, the instructions are clear cut. If you do need
assistance, call 1-800-233-4655 between 9-5pm CST. Our
customers overwhelmingly say "it was simple and
easy to install". The front hitch varies from vehicle
to vehicle. Plan about 30 minutes to 1 hour depending
on your level of experience. The plow is attached in
minutes by pluging in the push frame and attaching the
plow to it.
How
is the SnowSport™ Plow shipped?
It is shipped via common carrier in three boxes. The
plow box, push frame box, and receiver hitch box.
How
easy is the SnowSport™ Plow to hook-up or un-hook
between jobs?
It's very easy. Just insert the push frame into the
front receiver hitch and secure with pin. Then hang
the blade one end at a time onto the push frame (can
be done in less than a minute). Un hooking is just a
easy.
How
do you switch from transporting to plowing or from plowing
to transporting?
The operator must manually unhook the plow and lower
it for plowing. For transporting simply lift the blade,
one side at a time, onto the push frame.
How
can the SnowSport™ Plow operate without hydraulics?
The blade is secured by the push frame. As you push
the snow, the blade travels up and down as needed by
gravity. The rubber cutting edge is designed to cut
through the snow but pass over the harder ground surfaces
below and be gentle on grass. When you back up, the
blade automatically lays back, skimming over the surface.
Then you drive forward and the blade re-engages for
plowing.
How
well does the rubber cutting edge and box ends hold
up?
The rubber cutting edge is 1" thick 6" high
- made of a hard rubber compound. This has been tested
and proven to provide years of service. It can be replaced
relatively inexpensively.
What
is the warranty?
The plow has a 1-year limited warranty. See the owners
manual for details.
Can
I move the SnowSport from one vehicle to another?
Yes, the plow can be easily transfered to another vehicle,
all you need is a front receiver hitch.
Is
the SnowSport™ available for my vehicle?
It is available for most late model pickups and SUV's.
How
much does the plow weigh?
The aluminum blade is about 110 lbs. The complete kit
with blade, push frame, and hitch is about 225 lbs. |
| |
Bed Rug |
| |
How
does the bedrug install?
The sides zip together to the floor and the complete unit
attaches to the floor with hook and loop fasteners (similar
to Velcro). Plan about 20-30 minutes. How
does the tailgate piece fit/install?
The tailgate piece is attached to the floor of the bedrug
and extends to the top of the tailgate and attaches
with hook and loop fasteners.
Can
the bedrug be washed?
YES. Dirt and spills can be cleaned with soap and water
from a garden hose or high pressure washer. Actually,
Gasoline, acids, solvents, chemical compounds, and any
petroleum product will not damage the carpet or foam.
The closed-cell cross linked polyethylene foam can not
soak up ANY liquid. The BedRug® foam will not dry
out, crumble, dissolve, or dissipate in any way.
What
is the bedrug made of?
Polyester carpet and molded closed-cell polyethylene
foam.
How
long is the bedrug warranty?
It has a limited life-time warranty for the life of
the original truck it was installed in to the original
owner.
|
| |
Superchips |
| |
Will
the Superchip void my warranty?
No. It is illegal for the vehicle manufacturer to void
your warranty just because aftermarket parts are installed
on your vehicle. You are protected by the Magnuson-Moss
warranty, Federal Trade Commission Improvement Act.
Will
the Superchip hurt my engine, transmission, or computer?
No. How well you take care of your truck and handle
the extra horsepower determines longevity. Don’t
go spinning wheels and racing if durability is an issue.
Simple towing and traveling will do no harm.
How
will my fuel economy be affected?
Fuel mileage depends on HP increase and driving habits.
Typically, a 1 to 2 mpg increase is common. For the
power stroke diesel, we offer a chip that will give
2 to 5 more mpg in addition to increasing HP.
What
octane gas should I run?
We suggest that run use an octane rating of 91 or higher.
You will get more bang for your buck if you do. You
can get away with using 89 octane if you prefer. Even
87 octane in some cases but we don’t suggest 87.
If your valves ping, (sounds like something is rattling
loose) switch up to a higher octane.
What
type of assurance comes with your chip?
We offer a 30 day money back customer satisfaction guarantee
as well as a lifetime warranty. We only sell the absolute
best. Ask anyone who has one.
How
difficult is the installation process?
The instructions are clear cut. The Micro Tuner Programmer
takes about 4-15 minutes depending on the model. A phone
number is provided for after hour tech support. (note:
Dodge Ram D-Box takes about 15 minutes to install.)
Do
I need to change anything for the Superchip to work
properly?
There is no need to add or change anything with the
gas-operated engines. The PowerStroke how ever needs
no modifications with HP increases of 60HP or less.
More HP requires the turbo down pipe to be changed to
a 3 1⁄2" or larger. Adding a free flowing
exhaust and air filter will only help improve what you
already have. It doesn’t matter which vehicle
you own.
What
if I have or plan future modifications?
For an additional charge of $125, we can customize your
Superchip to accommodate modifications you have done
to your vehicle.
What
modifications require custom programming?
Modifications that benefit from custom programming include,
Headers, An H or X pipe, high performance cam, larger
mass air flow meter, larger flow fuel injectors, etc.
Modifications not requiring custom programming but will
improve your vehicles performance including a K&N,
AFE, Airaid, or DJ Motorsports air filter and air intake
system, a reduced backpressure exhaust system or muffler,
a new style of spark plugs, hotter thermostat, etc.
|
|
|
|
|
|
|
